Category: Home Furniture

The best fireplace covers and doors are an integral and focal point of the room where you, as a family, will spend your most relaxed and comfortable time. The regulations introduced in 2015 require you to have a fireplace cover so why not choose one that you love and that really sets your room alight, pardon the pun!

The process of buying anything new for your home can be quite exciting, and there are many brochures and stores to visit that stock many different kinds of fireplace covers made from all kinds of materials. However, your search may be made easier if you have a few facts in front of you, before you hit the stores.

The first major factor that will help your supplier is that you should know whether you want a masonry fireplace or a zero-clearance factory-built fireplace. The former is a fireplace that was built within the house, it is usually build out of natural stone or brick and is held together with mortar. The best place to tell this is by looking at the chimney. There should be no metal areas on a masonry fireplace.

Zero clearance fireplaces are ones that have been made elsewhere and then installed in your home. Again, the chimney is the place to look, if the exterior is covered with vinyl or anything else and if you have a metal framework surrounding the fireplace then this is a factory-built unit.

The reason you need to know this is that the doors or covers are different for the two options. You cannot, for example, cover up the air inlets on a metal fireplace as this could cause the fire to overheat and cause a fire.

The next step is that you need to measure your fireplace opening and take these measurements along with you to the store. This will enable you to be shown which of the doors and fireplace covers you can choose from that will fit to your needs. Property fitting doors are essential to ensure that your fire gives maximum performance. If they do not fit exactly this will decrease their effectivity and may also pose as another fire hazard.

When you have obtained all of this information and you have it to hand, why not head to a fireplace cover showroom. This is the fun part, you now get to choose a cover from the beautiful and bespoke ranges that are on offer. There are modern or contemporary designs depending on the look you are going for in your home. There are rustic, vintage, industrial and elegant looks all to catch your eye. The manufacturers are always trying to do something new to catch the eye of the buyer, they want them to blend in with your home décor, but they can also add some extras at the end of the process so that the door is fully customized for you. This can be anything from the color, the handle style the glass tint and they can also add spark protection for extra safety.

When you want to go for a brand new look or you just want to make some modifications, it is important to know what you are doing. According to Gary Friedman, Restoration Hardware Co-CEO, the most important thing that you need to remember is that you always need to have a plan. This is actually great advice for everything we do in life but you will be surprised to notice how many do not actually plan as they go out shopping. This can only lead to huge problems in the long run.

Obviously, not all plans are great. Because of this, Gary Friedman also talks about some of the main things that you want to take into account as you make your new plan.

Get Measurements Right

The most important thing is to catalog your room and measure everything in it. You want to know the space you have available and the dimensions of everything you are about to add or you already have inside. When you plan to add some items to your rooms, having a layout of what is already present is going to help you to choose great home furnishings. This advice is great for everything from furniture to artwork.

Consider Using A Theme

Home décor themes are very useful for absolutely all that do not have much interior design experience. If you have a theme in your head, it is easier to find the furnishing items that are actually going to match. This also saves a lot more time than you would imagine since matching furnishings without a theme is not at all easy to do.

Don’t Forget About The Local Furnishing Stores

Many homeowners look online and there is absolutely nothing wrong with that. There are countless sites that give you great deals but you might miss out on some that are available much closer to you than what you imagine.

There are different reasons why you should check the stocks of local furnishing stores. What we should highlight is that when you find discounts prices are much lower than expected and even when there are no discounts, negotiations can take place. You might also be able to order something specific at a discount because of the deals that are available through the retail store.

Garage Sales Should Be Considered

Some of the very best deals you could find are available at garage sales. You want to look at listings for them and see when they are announced. The garage sales are particularly useful when you are looking for vintage items. You can locate some wonderful gems there.

See What You Could Recondition

There are many items in your home that you can actually recondition instead of buying something new. This is definitely something that you want to take into account since prices would be a lot lower than what you would have to pay in the event you bought something new. Most of us have something in our garages or attics that we forgot about.

Whether you are re-doing the walls in a place you bought, or you are building your dream home from the ground up, knowing how to install drywall is a vital skill that will save you money and help to speed the process along.
Don’t be intimidated by this part of the building process – with a few key steps, anyone can learn how to do it.
One of Colorado’s most successful construction CEOs was a drywall rookie just like you until he discovered it was such a simple task, he knew he could make a business out of it.
Lloyd Claycomb has made a name for himself in the Denver construction industry by building up United Builders Service into one of the most prolific drywall installing companies in the area.
He did that by building a great deal of trust with clients by ensuring that they got things right the first time.
While you will be doing this job yourself, you can save yourself a tremendous amount of time by learning how to do drywall properly. This article will aim to educate you on this subject.

1) Gather the tools and materials you’ll need

Before you can apply drywall to the ceiling and walls of your home, you’ll need to bring together the required supplies.
Aside from the sheets of drywall themselves, you’ll need a square, a knife, and a saw specifically designed for this task, as well as special tape, screws, and the mud that will hold the sheets together.
A mud pan and a paper taper will be necessary for this job as well, so don’t forget them when you are at the hardware store.

2) Measure the area

Once you have all your supplies on hand, get out your tape measure so you’ll know how many panels you’ll need to buy.
Attach fasteners to the walls and ceiling where the plates of drywall will go, as this will make it easier for them to stay in place when installed.
When you get the drywall, you may need to cut them into smaller pieces to fit leftover areas that can’t accommodate a full sheet. Measure out where you’ll need to cut, and then slice it using your drywall knife.

3) Screw the drywall panel into a joist

Start with the ceiling panels, then move on to the walls immediately afterward. When you are in the process of hanging them, make certain that the edge of the sheets are positioned over a joist or a stud, as these make for good anchors, which will make your wall/ceiling stronger.

Be sure to use a drywall bit to screw the sheet into the stud/joist, but don’t go too fast when installing them, as the sheets can be damaged easily.

4) Apply mud to the drywall panels on the wall

Once your panels have all been secured, apply mud to their exterior. This will create a surface that will make applying texture and paint much easier.

5) Tape over the joints

The last important job of the process, taping joints will protect these connection points from external exposure, while making for a more aesthetic pleasing wall. Be sure to complete this task before the mud dries to avoid issues.